-----BEGIN PGP SIGNED MESSAGE-----
AUSCERT External Security Bulletin Redistribution
HPESBHF03769 rev.1 - HPE Integrated Lights-out 4 (iLO 4)
Multiple Remote Vulnerabilities
24 August 2017
AusCERT Security Bulletin Summary
Product: HPE Integrated Lights-out 4
Operating System: Network Appliance
Impact/Access: Execute Arbitrary Code/Commands -- Remote/Unauthenticated
CVE Names: CVE-2017-12542
- --------------------------BEGIN INCLUDED TEXT--------------------
- -----BEGIN PGP SIGNED MESSAGE-----
Note: the current version of the following document is available here:
SUPPORT COMMUNICATION - SECURITY BULLETIN
Document ID: hpesbhf03769en_us
HPESBHF03769 rev.1 - HPE Integrated Lights-out 4 (iLO 4) Multiple Remote
NOTICE: The information in this Security Bulletin should be acted upon as
soon as possible.
Release Date: 2017-08-23
Last Updated: 2017-08-23
Potential Security Impact: Remote: Authentication Bypass, Code Execution
Source: Hewlett Packard Enterprise, Product Security Response Team
A potential security vulnerability has been identified in HPE Integrated
Lights-out (iLO 4). The vulnerability could be exploited remotely to allow
authentication bypass and execution of code.
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
- HP Integrated Lights-Out 4 (iLO 4), Prior to 2.53
CVSS Base Metrics
Reference, CVSS V3 Score/Vector, CVSS V2 Score/Vector
Information on CVSS is documented in
HPE Customer Notice HPSN-2008-002 here:
Hewlett Packard Enterprise would like to thank Fabien Perigaud of Airbus
Defense and Space CyberSecurity for reporting this vulnerability.
HPE has provided software updates to resolve the vulnerability in HPE
Integrated Lights-out 4 (iLO 4). Please upgrade to HPE Integrated Lights-out
4 (iLO 4) firmware version 2.53 or newer.
* The firmware is available at <http://www.hpe.com/support/ilo4>
Version:1 (rev.1) - 24 August 2017 Initial release
Third Party Security Patches: Third party security patches that are to be
installed on systems running Hewlett Packard Enterprise (HPE) software
products should be applied in accordance with the customer's patch management
Support: For issues about implementing the recommendations of this Security
Bulletin, contact normal HPE Services support channel. For other issues about
the content of this Security Bulletin, send e-mail to firstname.lastname@example.org.
Report: To report a potential security vulnerability for any HPE supported
Web form: https://www.hpe.com/info/report-security-vulnerability
Subscribe: To initiate a subscription to receive future HPE Security Bulletin
alerts via Email: http://www.hpe.com/support/Subscriber_Choice
Security Bulletin Archive: A list of recently released Security Bulletins is
available here: http://www.hpe.com/support/Security_Bulletin_Archive
Software Product Category: The Software Product Category is represented in
the title by the two characters following HPSB.
3C = 3COM
3P = 3rd Party Software
GN = HPE General Software
HF = HPE Hardware and Firmware
MU = Multi-Platform Software
NS = NonStop Servers
OV = OpenVMS
PV = ProCurve
ST = Storage Software
UX = HP-UX
Copyright 2016 Hewlett Packard Enterprise
Hewlett Packard Enterprise shall not be liable for technical or editorial
errors or omissions contained herein. The information provided is provided
"as is" without warranty of any kind. To the extent permitted by law, neither
HP or its affiliates, subcontractors or suppliers will be liable for
incidental,special or consequential damages including downtime cost; lost
profits; damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration. The
information in this document is subject to change without notice. Hewlett
Packard Enterprise and the names of Hewlett Packard Enterprise products
referenced herein are trademarks of Hewlett Packard Enterprise in the United
States and other countries. Other product and company names mentioned herein
may be trademarks of their respective owners.
- -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
- -----END PGP SIGNATURE-----
- --------------------------END INCLUDED TEXT--------------------
You have received this e-mail bulletin as a result of your organisation's
registration with AusCERT. The mailing list you are subscribed to is
maintained within your organisation, so if you do not wish to continue
receiving these bulletins you should contact your local IT manager. If
you do not know who that is, please send an email to email@example.com
and we will forward your request to the appropriate person.
NOTE: Third Party Rights
This security bulletin is provided as a service to AusCERT's members. As
AusCERT did not write the document quoted above, AusCERT has had no control
over its content. The decision to follow or act on information or advice
contained in this security bulletin is the responsibility of each user or
organisation, and should be considered in accordance with your organisation's
site policies and procedures. AusCERT takes no responsibility for consequences
which may arise from following or acting on information or advice contained in
this security bulletin.
NOTE: This is only the original release of the security bulletin. It may
not be updated when updates to the original are made. If downloading at
a later date, it is recommended that the bulletin is retrieved directly
from the author's website to ensure that the information is still current.
Contact information for the authors of the original document is included
in the Security Bulletin above. If you have any questions or need further
information, please contact them directly.
Previous advisories and external security bulletins can be retrieved from:
Australian Computer Emergency Response Team
The University of Queensland
Internet Email: firstname.lastname@example.org
Facsimile: (07) 3365 7031
Telephone: (07) 3365 4417 (International: +61 7 3365 4417)
AusCERT personnel answer during Queensland business hours
which are GMT+10:00 (AEST).
On call after hours for member emergencies only.
-----BEGIN PGP SIGNATURE-----
-----END PGP SIGNATURE-----