-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

===========================================================================
             AUSCERT External Security Bulletin Redistribution

                               ESB-2016.1253
        HPSBHF03578 rev.1 - HPE ConvergedSystem for SAP HANA using
                  glibc, Multiple Remote Vulnerabilities
                                19 May 2016

===========================================================================

        AusCERT Security Bulletin Summary
        ---------------------------------

Product:           HPE ConvergedSystem for SAP HANA
Publisher:         Hewlett-Packard
Operating System:  SUSE
Impact/Access:     Execute Arbitrary Code/Commands -- Remote/Unauthenticated
                   Denial of Service               -- Remote/Unauthenticated
Resolution:        Patch/Upgrade
CVE Names:         CVE-2015-7547  

Original Bulletin: 
   https://h20564.www2.hpe.com/portal/site/hpsc/public/kb/docDisplay?docId=emr_na-c05140858

- --------------------------BEGIN INCLUDED TEXT--------------------

- -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Note: the current version of the following document is available here:
https://h20564.www2.hpe.com/portal/site/hpsc/public/kb/docDisplay?docId=emr_n
a-c05140858

SUPPORT COMMUNICATION - SECURITY BULLETIN

Document ID: c05140858
Version: 1

HPSBHF03578 rev.1 - HPE ConvergedSystem for SAP HANA using glibc, Multiple
Remote Vulnerabilities

NOTICE: The information in this Security Bulletin should be acted upon as
soon as possible.

Release Date: 2016-05-18
Last Updated: 2016-05-18

Potential Security Impact: Remote Arbitrary Code Execution, Denial of Service
(DoS)

Source: Hewlett Packard Enterprise, Product Security Response Team

VULNERABILITY SUMMARY
HPE ConvergedSystem for SAP HANA Solutions has addressed stack-based buffer
overflows in the GNU C library's (glibc) implementation of the getaddrinfo()
library function. These vulnerabilities could be exploited remotely to cause
a Denial of Service (DoS) or allow execution of arbitrary code on the host
with the permissions of a user using the glibc library.

References: CVE-2015-7547

SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.

HP ConvergedSystem 500 For SAP HANA Scale-out Configurations 2.0, 3.0
HP ConvergedSystem 500 For SAP HANA Scale-Up Configurations 2.0, 3.0
HP ConvergedSystem 900 for SAP HANA Scale-out Configurations 2.0, 3.0
HP ConvergedSystem 900 for SAP HANA Scale-up Configurations 2.0, 3.0
HP AppSystems for SAP HANA - Scale Out Configurations 1.0, 1.2
HP AppSystems for SAP HANA - Single Node Configurations 1.0

BACKGROUND

CVSS 2.0 Base Metrics
===========================================================
  Reference              Base Vector             Base Score
CVE-2015-7547    (AV:N/AC:M/Au:N/C:P/I:P/A:P)       6.8
===========================================================
             Information on CVSS is documented
            in HP Customer Notice: HPSN-2008-002

RESOLUTION

HPE has made the following software updates available to resolve these
vulnerabilities in HPE ConvergedSystem for SAP HANA:

OS patches for SLES for SAP 11 SP3 based systems

Please contact HPE Technical Support to determine your system's vulnerability
and support options.

HISTORY
Version:1 (rev.1) - 18 April 2016 Initial release

Third Party Security Patches: Third party security patches that are to be
installed on systems running Hewlett Packard Enterprise (HPE) software
products should be applied in accordance with the customer's patch management
policy.

Support: For issues about implementing the recommendations of this Security
Bulletin, contact normal HPE Services support channel. For other issues about
the content of this Security Bulletin, send e-mail to security-alert@hpe.com.

Report: To report a potential security vulnerability with any HPE supported
product, send Email to: security-alert@hpe.com

Subscribe: To initiate a subscription to receive future HPE Security Bulletin
alerts via Email: http://www.hpe.com/support/Subscriber_Choice

Security Bulletin Archive: A list of recently released Security Bulletins is
available here: http://www.hpe.com/support/Security_Bulletin_Archive

Software Product Category: The Software Product Category is represented in
the title by the two characters following HPSB.

3C = 3COM
3P = 3rd Party Software
GN = HPE General Software
HF = HPE Hardware and Firmware
MU = Multi-Platform Software
NS = NonStop Servers
OV = OpenVMS
PV = ProCurve
ST = Storage Software
UX = HP-UX

Copyright 2016 Hewlett Packard Enterprise

Hewlett Packard Enterprise shall not be liable for technical or editorial
errors or omissions contained herein. The information provided is provided
"as is" without warranty of any kind. To the extent permitted by law, neither
HP or its affiliates, subcontractors or suppliers will be liable for
incidental,special or consequential damages including downtime cost; lost
profits; damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration. The
information in this document is subject to change without notice. Hewlett
Packard Enterprise and the names of Hewlett Packard Enterprise products
referenced herein are trademarks of Hewlett Packard Enterprise in the United
States and other countries. Other product and company names mentioned herein
may be trademarks of their respective owners.

- -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQEcBAEBAgAGBQJXPHo8AAoJEGIGBBYqRO9/XmkH/2lPeGZHbFfY/ZzHt5nTGEbi
5ZYZKVInHfeKQ61/4M15pg7ikI+Xt1ydtYda1xbtV8djEvxqb4VEBZhlfzdMjzt5
c/TQWqkEOCDrm2KybI8k4y9OMt20uxjnz4eG+JYt6TNFeNUr8DBbWO/oJaghTjk5
NCmDCHs2JzvT+nJ43vSoW3f6UVB2Z5aNEdBAHIXp3yLIqSvwwz642NuawJqspXJh
l+V/oWICd8nPqCD6+8lkD+1IqJeX+MXh3GUzx/cLZIPqP1cCwaQBPpqTorg2cHPA
+Lu4ogTOZio/WppBNhaHVxpU9dJn+qnBBe3H+r5iVvZXTYSmJ9/P7/feHwOmxkY=
=lk5z
- -----END PGP SIGNATURE-----

- --------------------------END INCLUDED TEXT--------------------

You have received this e-mail bulletin as a result of your organisation's
registration with AusCERT. The mailing list you are subscribed to is
maintained within your organisation, so if you do not wish to continue
receiving these bulletins you should contact your local IT manager. If
you do not know who that is, please send an email to auscert@auscert.org.au
and we will forward your request to the appropriate person.

NOTE: Third Party Rights
This security bulletin is provided as a service to AusCERT's members.  As
AusCERT did not write the document quoted above, AusCERT has had no control
over its content. The decision to follow or act on information or advice
contained in this security bulletin is the responsibility of each user or
organisation, and should be considered in accordance with your organisation's
site policies and procedures. AusCERT takes no responsibility for consequences
which may arise from following or acting on information or advice contained in
this security bulletin.

NOTE: This is only the original release of the security bulletin.  It may
not be updated when updates to the original are made.  If downloading at
a later date, it is recommended that the bulletin is retrieved directly
from the author's website to ensure that the information is still current.

Contact information for the authors of the original document is included
in the Security Bulletin above.  If you have any questions or need further
information, please contact them directly.

Previous advisories and external security bulletins can be retrieved from:

        http://www.auscert.org.au/render.html?cid=1980

===========================================================================
Australian Computer Emergency Response Team
The University of Queensland
Brisbane
Qld 4072

Internet Email: auscert@auscert.org.au
Facsimile:      (07) 3365 7031
Telephone:      (07) 3365 4417 (International: +61 7 3365 4417)
                AusCERT personnel answer during Queensland business hours
                which are GMT+10:00 (AEST).
                On call after hours for member emergencies only.
===========================================================================
-----BEGIN PGP SIGNATURE-----
Comment: http://www.auscert.org.au/render.html?it=1967
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=wlTA
-----END PGP SIGNATURE-----