Hash: SHA1

             AUSCERT External Security Bulletin Redistribution

             ESB-2004.0502 -- HP Security Bulletin HPSBUX01068
       SSRT4788 rev. 0 HP-UX Apache Remote arbitrary code execution
                              10 August 2004


        AusCERT Security Bulletin Summary

Product:                Apache
Publisher:              Hewlett-Packard
Operating System:       HP-UX 11.04 with Virtualvault 4.7, 4.6, or 4.5
Impact:                 Execute Arbitrary Code/Commands
Access:                 Remote/Unauthenticated
CVE Names:              CAN-2004-0488

Ref:                    ESB-2004.0495

- --------------------------BEGIN INCLUDED TEXT--------------------

Hash: SHA1



SSRT4788 rev. 0 HP-UX Apache Remote arbitrary code execution

 There are no restrictions for distribution of this Bulletin
 provided that it remains complete and intact.

 The information in this Security bulletin should be acted upon
 as soon as possible.

INITIAL RELEASE:    08 August 2004

POTENTIAL SECURITY IMPACT:    Remote arbitrary code execution

HP Software Security Response Team

REFERENCES:    CAN-2004-0488

A potential security vulnerability has been identified with HP-UX
running Apache where a buffer overflow could be exploited remotely
to execute arbitrary code.

SUPPORTED SOFTWARE VERSIONS*:  ONLY impacted versions are listed.
HP-UX B.11.04 with Virtualvault 4.7, Virtualvault 4.6, or
Virtualvault 4.5.

A potential security vulnerability has been reported in the
Common Vulnerabilities and Exposures project
< http://cve.mitre.org/> on mod_ssl module of Apache
HTTP server.  It has been assigned the candidate number
CAN-2004-0488 and is described as below.

Stack-based buffer overflow in the ssl_util_uuencode_binary
function in ssl_util.c for Apache mod_ssl, when mod_ssl is
configured to trust the issuing CA, and "FakeBasicAuth" is
being used, may allow remote attackers to execute arbitrary
code via a client certificate with a long subject DN.
(CVE CAN-2004-0488).


     Note: To determine if a system has an affected version,
     search the output of "swlist -a revision -l fileset" for an
     affected fileset.  Then determine if the recommended
     patch or update is installed.

      HP-UX B.11.04 Virtualvault A.04.70
      action: install PHSS_30944 or subsequent

      action: install PHSS_31058 or subsequent

      HP-UX B.11.04 Virtualvault A.04.60
      action: install PHSS_30946 or subsequent

      action: install PHSS_31057 or subsequent

      HP-UX B.11.04 Virtualvault A.04.50
      action: install PHSS_30647 or subsequent

      action: install PHSS_30648 or subsequent

      HP-UX B.11.04 HP Webproxy A.02.10
      action: install PHSS_30950 or subsequent

      HP-UX B.11.04 HP Webproxy A.02.00
      action: install PHSS_30949 or subsequent


For B.11.04 HP has made the following patches available:

    PHSS_30944 Virtualvault 4.7 IWS update
    PHSS_31058 Virtualvault 4.7 OWS update

    PHSS_30946 Virtualvault 4.6 IWS update
    PHSS_31057 Virtualvault 4.6 OWS update

    PHSS_30647 Virtualvault 4.5 IWS Update
    PHSS_30648 Virtualvault 4.5 OWS update

    PHSS_30950 Webproxy server 2.1 update
    PHSS_30949 Webproxy server 2.0 update


Revision 0 - 5 August 2004

  Initial Release

* The software product category that this Security Bulletin
  relates to is represented by the 5th and 6th characters of the
  Bulletin number: GN=General, MA=Management Agents,
  MI=Misc. 3rd party, MP=HP-MPE/iX, NS=HP NonStop Servers,
  OV=HP OpenVMS, PI=HP Printing & Imaging, ST=HP Storage,
  TU=HP Tru64 UNIX, TL=Trusted Linux, UX=HP-UX, VV=Virtual Vault

SUPPORT: For further information, contact HP Services support

SUBSCRIBE: To initiate a subscription to receive future HP
Security Bulletins via Email:
On the web page:
Driver and Support Alerts/Notifications Sign-up: Product Selection
Under Step1: your products
1. Select product category:
   - a minimum of servers must be selected.
2. Select product family or search:
   - a minimum of one product must be selected.
3. Add a product:
   - a minimum of one product must be added.
In Step 2: your operating system(s)
   - check ALL operating systems for which alerts are required.
Complete the form and Save.

To update an existing subscription:
Log in on the web page Subscriber's choice for Business: sign-in.
On the Web page: Subscriber's Choice: your profile summary
- - - - use Edit Profile to update appropriate sections.

Note: In addition to the individual alerts/notifications for the
selected operating systems/products, subscribers will
automatically receive one copy of alerts for non-operating system
categories (i.e., a subscriber who signs up for all six operating
system alerts will only receive one copy of all the non-operating
system alerts).

The HP-UX Security Patch Matrix is available here:
Or via anonymous ftp:

The HP-UX Security Patch Matrix, updated daily, categorizes
security patches by platform/OS release, and by Bulletin topic.
The Security Patch Check tool completely automates the process of
reviewing the Security Patch Matrix for HP-UX 11.XX Versions.

NOTE: Installing patches listed in the Security Patch Matrix will
completely implement the RESOLUTION in the Security Bulletin
_only_ if there are no MANUAL ACTIONS included.

The Security Patch Check tool can also verify that a Security
Bulletin RESOLUTION has been implemented on HP-UX 11.XX Versions
provided that no MANUAL ACTIONS were included. The Security Patch
Check tool cannot verify patches implemented via product upgrade.

For information on the Security Patch Check tool, see:

REPORT: To report a potential security vulnerability with any HP
supported product, send Email to: security-alert@hp.com. It is
strongly recommended that security related information being
communicated to HP be encrypted using PGP, especially exploit
information. To obtain the security-alert PGP key please send an
e-mail message to security-alert@hp.com with the Subject of
'get key' (no quotes).

System management and security procedures must be reviewed
frequently to maintain system integrity. HP is continually
reviewing and enhancing the security features of software products
to provide customers with current secure solutions.

"HP is broadly distributing this Security Bulletin in order to
bring to the attention of users of the affected HP products the
important security information contained in this Bulletin. HP
recommends that all users determine the applicability of this
information to their individual situations and take appropriate
action. HP does not warrant that this information is necessarily
accurate or complete for all user situations and, consequently,
HP will not be responsible for any damages resulting from user's
use or disregard of the information provided in this Bulletin.
To the extent permitted by law, HP disclaims all warranties,
either express or implied, including the warranties of
merchantability and fitness for a particular purpose, title
and non-infringement."

(c)Copyright 2004 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or
editorial errors or omissions contained herein. The information
provided is provided "as is" without warranty of any kind. To the
extent permitted by law, neither HP or its affiliates,
subcontractors or suppliers will be liable for incidental, special
or consequential damages including downtime cost; lost profits;
damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration.
The information in this document is subject to change without
notice. Hewlett-Packard Company and the names of Hewlett-Packard
products referenced herein are trademarks of Hewlett-Packard
Company in the United States and other countries. Other product
and company names mentioned herein may be trademarks of their
respective owners.

Version: PGP 8.0.2


- --------------------------END INCLUDED TEXT--------------------

You have received this e-mail bulletin as a result of your organisation's
registration with AusCERT. The mailing list you are subscribed to is
maintained within your organisation, so if you do not wish to continue
receiving these bulletins you should contact your local IT manager. If
you do not know who that is, please send an email to auscert@auscert.org.au
and we will forward your request to the appropriate person.

NOTE: Third Party Rights
This security bulletin is provided as a service to AusCERT's members.  As
AusCERT did not write the document quoted above, AusCERT has had no control
over its content. The decision to follow or act on information or advice
contained in this security bulletin is the responsibility of each user or
organisation, and should be considered in accordance with your organisation's
site policies and procedures. AusCERT takes no responsibility for consequences
which may arise from following or acting on information or advice contained in
this security bulletin.

NOTE: This is only the original release of the security bulletin.  It may
not be updated when updates to the original are made.  If downloading at
a later date, it is recommended that the bulletin is retrieved directly
from the author's website to ensure that the information is still current.

Contact information for the authors of the original document is included
in the Security Bulletin above.  If you have any questions or need further
information, please contact them directly.

Previous advisories and external security bulletins can be retrieved from:


If you believe that your computer system has been compromised or attacked in 
any way, we encourage you to let us know by completing the secure National IT 
Incident Reporting Form at:


Australian Computer Emergency Response Team
The University of Queensland
Qld 4072

Internet Email: auscert@auscert.org.au
Facsimile:      (07) 3365 7031
Telephone:      (07) 3365 4417 (International: +61 7 3365 4417)
                AusCERT personnel answer during Queensland business hours
                which are GMT+10:00 (AEST).
                On call after hours for member emergencies only.

Comment: http://www.auscert.org.au/render.html?it=1967