-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

===========================================================================
             AUSCERT External Security Bulletin Redistribution

                    ESB-2006.0709 -- [Win][UNIX/Linux]
                           OpenSSH 4.4 released
                              5 October 2006

===========================================================================

        AusCERT Security Bulletin Summary
        ---------------------------------

Product:              OpenSSH
Publisher:            OpenSSH
Operating System:     UNIX variants (UNIX, Linux, OSX)
                      Windows
Impact:               Denial of Service
                      Execute Arbitrary Code/Commands
                      Reduced Security
Access:               Remote/Unauthenticated
CVE Names:            CVE-2006-5051 CVE-2006-4924

Revision History:  October 5 2006: Added CVE-2006-5051 and CVE-2006-4924
                   September 28 2006: Initial Release

- --------------------------BEGIN INCLUDED TEXT--------------------

OpenSSH 4.4 has just been released. It will be available from the
mirrors listed at http://www.openssh.com/ shortly.

OpenSSH is a 100% complete SSH protocol version 1.3, 1.5 and 2.0
implementation and includes sftp client and server support.

Once again, we would like to thank the OpenSSH community for their
continued support of the project, especially those who contributed
code or patches, reported bugs, tested snapshots and purchased
T-shirts or posters.

T-shirt, poster and CD sales directly support the project. Pictures
and more information can be found at:
        http://www.openbsd.org/tshirts.html and
	http://www.openbsd.org/orders.html

For international orders use http://https.openbsd.org/cgi-bin/order
and for European orders, use http://https.openbsd.org/cgi-bin/order.eu

Changes since OpenSSH 4.3:
============================

Security bugs resolved in this release:

 * Fix a pre-authentication denial of service found by Tavis Ormandy,
   that would cause sshd(8) to spin until the login grace time
   expired.

 * Fix an unsafe signal hander reported by Mark Dowd. The signal
   handler was vulnerable to a race condition that could be exploited
   to perform a pre-authentication denial of service. On portable
   OpenSSH, this vulnerability could theoretically lead to
   pre-authentication remote code execution if GSSAPI authentication
   is enabled, but the likelihood of successful exploitation appears
   remote.

 * On portable OpenSSH, fix a GSSAPI authentication abort that could
   be used to determine the validity of usernames on some platforms.

This release includes the following new functionality and fixes:

 * Implemented conditional configuration in sshd_config(5) using the
   "Match" directive. This allows some configuration options to be
   selectively overridden if specific criteria (based on user, group,
   hostname and/or address) are met. So far a useful subset of post-
   authentication options are supported and more are expected to be
   added in future releases.

 * Add support for Diffie-Hellman group exchange key agreement with a
   final hash of SHA256.

 * Added a "ForceCommand" directive to sshd_config(5). Similar to the
   command="..." option accepted in ~/.ssh/authorized_keys, this forces
   the execution of the specified command regardless of what the user
   requested. This is very useful in conjunction with the new "Match"
   option.

 * Add a "PermitOpen" directive to sshd_config(5). This mirrors the
   permitopen="..." authorized_keys option, allowing fine-grained
   control over the port-forwardings that a user is allowed to
   establish.

 * Add optional logging of transactions to sftp-server(8).

 * ssh(1) will now record port numbers for hosts stored in
   ~/.ssh/authorized_keys when a non-standard port has been requested.

 * Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with
   a non-zero exit code) when requested port forwardings could not be
   established.

 * Extend sshd_config(5) "SubSystem" declarations to allow the
   specification of command-line arguments.

 * Replacement of all integer overflow susceptible invocations of
   malloc(3) and realloc(3) with overflow-checking equivalents.

 * Many manpage fixes and improvements

 * New portable OpenSSH-specific features:

   - Add optional support for SELinux, controlled using the
     --with-selinux configure option (experimental)

   - Add optional support for Solaris process contracts, enabled
     using the --with-solaris-contracts configure option (experimental)
     This option will also include SMF metadata in Solaris packages
     built using the "make package" target

   - Add optional support for OpenSSL hardware accelerators (engines),
     enabled using the --with-ssl-engine configure option.

 * Bugs from http://bugzilla.mindrot.org fixed:
    #482  - readconf doesn't accept paths with spaces in them.
    #906  - syslog messages from sshd [net] lost.
    #975  - Kerberos authentication timing can leak information
            about account validity.
    #981  - Flow stop in SSH2.
    #1102 - C program 'write' with zero length hangs.
    #1129 - sshd hangs for command-only invocations due to
            fork/child signals.
    #1131 - error "buffer_append_space:alloc not supported"
    #1138 - Passphrase asked for (but ignored) if key file permissions
            too liberal..
    #1156 - Closes connection after C-c is pressed on QNX.
    #1157 - ssh-keygen doesn't handle DOS line breaks.
    #1159 - %u and %h not handled in IdentityFile.
    #1161 - scp -r fails.
    #1162 - Inappropriate sequence of syslog messages.
    #1166 - openssh-4.3p1 has some issues compiling.
    #1171 - configure can't always figure out LLONG_MAX..
    #1173 - scp reports lost connection for very large files.
    #1177 - Incorrect sshrc file location in Makefile.in.
    #1179 - sshd incorrectly rejects  connections due to IP options.
    #1181 - configure should detect when openssl-0.9.8x needs -ldl.
    #1186 - ssh tries multiple times to open unprotected keys.
    #1188 - keyboard-interactive should not allow retry after
            pam_acct_mgmt fails.
    #1193 - Open ssh will not allow changing of passwords on usernames
            greater than 8 characters..
    #1201 - Bind address information is not specified in command line
            help messages.
    #1203 - configure.ac is missing an open [.
    #1207 - sshd does not clear unsuccessful login count on
            non-interactive logins.
    #1218 - GSSAPI client code permits SPNEGO usage.
    #1221 - Banner only suppressed at log level = QUIET (used to be
            at log level < INFO).

 * Fixes to memory and file descriptor leaks reported by the Coverity
   static analysis tool

 * Fixes to inconsistent pointer checks reported by the Stanford
   SATURN tool

Thanks to everyone who has contributed patches, reported bugs and
tested releases.

Checksums:
==========

- - SHA1 (openssh-4.4.tar.gz) = 2294b5e5a591420aa05ff607c1890ab622ace878
- - SHA1 (openssh-4.4p1.tar.gz) = 6a52b1dee1c2c9862923c0008d201d98a7fd9d6c

Reporting Bugs:
===============

- - please read http://www.openssh.com/report.html
  and http://bugzilla.mindrot.org/

OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de Raadt,
Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre, Tim Rice and
Ben Lindstrom.

- --------------------------END INCLUDED TEXT--------------------

You have received this e-mail bulletin as a result of your organisation's
registration with AusCERT. The mailing list you are subscribed to is
maintained within your organisation, so if you do not wish to continue
receiving these bulletins you should contact your local IT manager. If
you do not know who that is, please send an email to auscert@auscert.org.au
and we will forward your request to the appropriate person.

NOTE: Third Party Rights
This security bulletin is provided as a service to AusCERT's members.  As
AusCERT did not write the document quoted above, AusCERT has had no control
over its content. The decision to follow or act on information or advice
contained in this security bulletin is the responsibility of each user or
organisation, and should be considered in accordance with your organisation's
site policies and procedures. AusCERT takes no responsibility for consequences
which may arise from following or acting on information or advice contained in
this security bulletin.

NOTE: This is only the original release of the security bulletin.  It may
not be updated when updates to the original are made.  If downloading at
a later date, it is recommended that the bulletin is retrieved directly
from the author's website to ensure that the information is still current.

Contact information for the authors of the original document is included
in the Security Bulletin above.  If you have any questions or need further
information, please contact them directly.

Previous advisories and external security bulletins can be retrieved from:

        http://www.auscert.org.au/render.html?cid=1980

If you believe that your computer system has been compromised or attacked in 
any way, we encourage you to let us know by completing the secure National IT 
Incident Reporting Form at:

        http://www.auscert.org.au/render.html?it=3192

===========================================================================
Australian Computer Emergency Response Team
The University of Queensland
Brisbane
Qld 4072

Internet Email: auscert@auscert.org.au
Facsimile:      (07) 3365 7031
Telephone:      (07) 3365 4417 (International: +61 7 3365 4417)
                AusCERT personnel answer during Queensland business hours
                which are GMT+10:00 (AEST).
                On call after hours for member emergencies only.
===========================================================================

-----BEGIN PGP SIGNATURE-----
Comment: http://www.auscert.org.au/render.html?it=1967

iQCVAwUBRSSH5yh9+71yA2DNAQL7xgP/SPzSqAvg6DIZ+MvblenbdZ7sKTs3ypoY
QEf/U9ainAnsJvk2CwBRSLeXFH/j1iyFt7jonJFqtB7hXXWD2NbUPfsEylijuyvo
ZO7oSvJQLcctB67sTFd43y7armXlvxfOL+PAYLqplR1i8DeeVfOgAL9pMD3zlfZ9
VSRZFOXB7Ng=
=GfHz
-----END PGP SIGNATURE-----